EPDM, Felt or Fibreglass: Which Flat Roof Material is Best?
Comparing the three most common flat roofing materials used in the UK — EPDM rubber, GRP fibreglass, and traditional felt. Find out which is right for your project.
By RoofingNetwork Editorial Team · 6 min read · Roof Types
If you're having a flat roof installed or replaced, your roofer will likely recommend one of three materials: EPDM rubber, GRP fibreglass, or traditional layered felt. Each has its place depending on your budget, the size of the area, and the aesthetic you're after. Here's an honest comparison.
At a Glance
| Material | Lifespan | Cost per m² | Best For |
|---|---|---|---|
| Traditional felt | 10 – 15 years | £40 – £60 | Budget projects, temporary cover |
| EPDM rubber | 30 – 50 years | £60 – £80 | Most domestic flat roofs |
| GRP fibreglass | 25 – 35 years | £70 – £100 | Extensions, clean finish |
Traditional Layered Felt
Traditional built-up felt roofing uses multiple layers of bitumen-impregnated felt bonded with hot bitumen or torch-on application. It's the cheapest option upfront, but has the shortest lifespan and the highest long-term maintenance costs. Most professional roofers now recommend avoiding it for new installs unless the budget is very tight.
- Pros: lowest upfront cost, widely available, easy to repair
- Cons: shortest lifespan, can crack in UV/freeze-thaw cycles, looks dated
EPDM Rubber Membrane
EPDM (ethylene propylene diene monomer) is a synthetic rubber membrane that has become the go-to material for domestic flat roofing in the UK over the past decade. It's supplied in large sheets that can cover entire roof areas without joins, dramatically reducing the risk of leaks.
- Pros: extremely long lifespan (30–50 years), highly UV-resistant, flexible in cold weather, no joins on standard domestic sizes, low maintenance
- Cons: dark grey appearance (though 'stone' finishes are available), can puncture if heavy objects are dropped on it, requires proper adhesion to avoid ballooning
EPDM is the closest thing to a 'fit and forget' flat roofing solution currently available. For most homeowners having an extension or outbuilding roof replaced, it's the best all-round choice.
GRP Fibreglass (Glass Reinforced Plastic)
GRP is laid wet and cures to form a rigid, seamless shell over the roof deck. It's incredibly tough, waterproof, and can be walked on safely — making it ideal if you want to create a roof terrace. It also has a cleaner, more modern appearance than EPDM or felt.
- Pros: seamless and rigid finish, very tough, good-looking, can be used as a terrace base, easy to repair
- Cons: more expensive to install, can crack on very large areas if movement isn't accounted for, application is weather-dependent (needs dry conditions above 5°C)
Which Should You Choose?
For a garage, outbuilding, or extension roof where longevity and low maintenance are the priority — choose EPDM. For a contemporary extension or a roof you want to walk on — choose GRP fibreglass. Only consider traditional felt if it's a temporary measure or budget is extremely constrained.
Whichever material you choose, ensure your roofer has specific experience with that system. An EPDM roof installed by someone unfamiliar with the adhesion process can fail prematurely regardless of the material's inherent quality.